Nothing is impossible.
Years of experience in production – pressing, casting and turning – have made us an expert in these areas.
Our own tool management enables high flexibility and minor downtimes.
Due to a qualified supplier management we only cooperate with certified suppliers to guarantee high-quality products.
Hot-pressed parts are produced by fully automated machines with a force of pressure of 250 - 500 t.
- A special cooling process enables a uniform and fine structure with a better fibre flow
- Construction and production of dies and cutting tools in our own tool manufacture for a flexible and prompt realization
Our performance in an overview
| Technologie: | Hollow pressing procedure (max. 3.7 kg) |
| Sizes per piece: | Diameter up to 130 mm / length up to 420 mm |
| Weight per piece: | up to 3 kg |
| Certification: | DIN EN ISO 9001:2008 |
| Availability: |
|
The complete inhouse-production of cast parts enables an extremely high flexibility when realising product and customers requirements so that above all small and middle-sized series can be manufactured fast and precisely.
- Production of casting parts on mould casting machines with modern induction furnace equipment
- The production of ingot moulds and cores is carried out in our own tool manufacture
- From placing orders until delivery of samples there will be only 14 days (if the ingot moulds are available)
Our performance in an overview
| Processing: | Gravity die casting |
| Sizes per piece: | Diameter up to 130 mm / length up to 420 mm |
| Weight per piece: | up to 5 kg |
| Certification: | DIN EN ISO 9001:2008 |
Availability: |
|
CNC lathes with corresponding programming places enable processing of complex and difficult parts in one single mounting.
- Rotation symmetrical parts up to a bar diameter of 90 mm
- Max. size of the form parts (e.g. T-fitting or bracket): diameter 100 mm / length 420 mm
Our performance in an overview
| Processing: |
|
| Sizes per piece: | Diameter up to 210 mm |
| Weight per Piece: | up to 5 kg |
| Certification: | DIN EN ISO 9001:2008 |
| Availability: |
|
BEULCO is your expert in producing brass fittings
Our different manufacturing processes enable a delivery at best performance.
The table below gives an overview about alloys we process:
| Material | Description | Structure | Drinking water conformity | Casting | Pressing | Turning |
|---|---|---|---|---|---|---|
| CW602N | Brass | CuZn36Pb2As | No | see brass (cast) | Yes | Yes |
| CW617N | Brass | CuZn40Pb2 | Yes | see brass (cast) | Yes | Yes |
| CW724R | ECOBRASS | CuZn21Si3P | Yes | No | Yes | Yes |
| CC770S | Brass (cast) | CuZn36Pb-C | Yes | Yes | Post-production | |
| CS754S-GM | Brass (cast) | CuZn39Pb1Al-C | No | Yes | Post-production | |
| CC493K-GC | Red brass RG7 | CuSn7Zn4Pb7 | No | No | No | Yes |
| CC499K-GC | Red brass RG5 (lead-reduced) | CuSn5Zn5Pb2 | Yes | No | No | Yes |
We manufacture
various
alloys
Made in
Sauerland
More than
30 different
types of machine
DIN ISO
9001
Our Quality is
excellent
